YUKEN TECHNOLOGY (GUANGZHOU) CO., LIMITED

Basic parameters

Weight:

157/205

Support height:

0 m

Allowable load:

0 Pa

Bending strength:

0 mPa

Output liquid pressure:

275 mPa

Use a pressure range:

0 mPa

Medium pressure maximum:

275 mPa

Power:

3/4

Nominal pressure:

1370/2000 PN

Working temperature:

0-60 ℃

Work table size:

600*600 mm

The steel:

0 kL

The minimum travel non hinge shaft connection:

0 mm

Brand:

Fen Bao

Model.

P20 P32

Detailed description

Pure imported, classic models, simple operation, quality assurance.

Button press (now the market is also called locking tube machine,pressure machine, tube machine, buckle buckle machine, rivetingmachine, necking machine, Guangdong Province) Cantonese like called:Beer laryngeal machine. English name usually translated as: crimpingmachine or crimper. Fastener is used for pressing hydraulic equipmentpipe assembly, metal joints the supporting mold machine through withholding applied force of contraction, the metal joint is firmlypressed on the construction machinery matching with high pressure tubing or automobile brake pipe, oil pipe, tube, power tube. Crimping machine is applicable to all types of machinery of high and low pressure pipeline, pipe, pipe, cable connector, automobile air-conditioning pipe, automobile power steering pipe, oil pipe, oil pipeof gasoline, withhold and building fittings, daily hot water pipe,widely used in vehicles, engineering machinery, hydraulic machinery,welding and cutting equipment industry.

The basic principle of burke:

1, double hydraulic circuit operation principle, namely, advance and retreat and die piston opening and contraction are power produced byhydraulic power source. It not only move smoothly, return quickly,also won't happen like spring return, the mold can not open the lock of the phenomenon. And cylinder locking system design are coherent,easy to withhold various special-shaped elbow.

2, the hydraulic system consists of motor, pump, solenoid valve,pressure regulating valve and the hydraulic valve with doublehydraulic circuit and movement, but also in the double hydraulic oilalso increased from a quick oil discharge valve oil, in order to achieve more rapid return to, and adjustable speed, noise and reducing the system pressure.

3, in the electrical control system, the control circuit for PLCcircuit, it is easy to repair, overhaul circuit, replacing the simpleconvenience.

4, pressing die and mould seat with no cumulative error processingprocess, to ensure product lines withhold withhold evenly spaced,without transition phenomenon.

5, in order to buckle press permanent mechanical precision and life,in the locking mechanism assembly, not only to choose the high quality alloy steel material, and the heat treatment process is unique. So thebutton press long service life: the rationality and material, heat treatment, machining process and structure are inseparable!

6, press standard theory: off the head, without damaging the tubeglue. If you don't want to be off the head buckle pressure must behigh, not to destroy the inner rubber - buckle pressure is small. To resolve this contradiction, we must first select the 1 fastenerwithout taper (0 taper) pressure pipe machine before and after thehydraulic metal joint ends data consistency, avoid error. (Note: if the metal joint front compression strength is too large, will be jointcrush. If a metal joint back-end compression strength is too large,will tube gum fracturing, resulting in hose oil etc).