Basic parameters
Range of use:
Surface treatment coating
Function and characteristics:
Wear resistance, pressure resistance, durability
Brand:
Guangzhou
Model.
13*29 32*52
Detailed description
Special wear-resisting, withstand price concessions
Modern industrial activities is very extensive application of blastpipe, especially in shipbuilding, machinery processing, sprayingindustry etc.. Sandblasting pipe in the strong corrosion and high wear conditions fully demonstrated the "superiority of energy saving and environmental protection, economic, efficient". Because the blast tube with 10MPa minimum necessary strength, in the use of more advantage,in the practical application to be used very well, need to have what conditions? Semi crystalline layout sandblasting pipe has excellentfunctions depends largely on its. Its short-term strength, impact strength, tensile strength, hardness is mainly composed of crystalline phase limit data; and long time strength, for example: theenvironmental stress cracking resistance function, molecular chain entanglement relies on the amorphous region, intergranular lacingadaptor molecule more the better function.
1 the use of temperature: the temperature is -20 ℃ - 70 ℃ hose.
2 material and structure: sandblasting pipe shall have the followingparts: inner lining layer (inner layer); the enhancement layer with the appropriate method of laying of natural or synthetic fabric; outer layer (outer layer); the enhancement layer is laminated cloth and cordwinding method.
Sandblasting pipe work usually need to have what conditions:
As everyone knows, in the shipbuilding, machinery processing, sprayingindustry industry will use sandblasting pipe. In fact, sandblasting treatment in chemical corrosion proof construction is a surface treatment method is the most commonly used, compared with othermethods, it has high efficiency, good quality. Sandblasting pipesuitable for wind sand blasting on metal surface, scutching and construction of wet sand and dry sand rubber hose used for blasting.Sand blasting work usually need to have what conditions?
While sandblasting is mainly by the high pressure air as power,through the nozzle abrasive jet to the metal surface, depending on theabrasive edge impact and friction, the metal surface rust and otherimpurities thoroughly cleared, to obtain a certain roughness, and reveal a surface metal color. The abrasive is the requirement ofschool angle, hardness and grain size is moderate, does not containoil, moisture content below I%. When the surface of pretreatmentrequired Sa3 or Sat language level, is the use of river sand and sea sand as abrasive. |