Basic parameters
Weight:
0.5
Support height:
0.05 M
Allowable load:
1 Pa
Bending strength:
1 mPa
Output liquid pressure:
1 mPa
Use a pressure range:
1 mPa
Medium pressure maximum:
1 mPa
Power:
1
Nominal pressure:
1 PN
Working temperature:
30 ℃
Work table size:
1 mm
The steel:
42 kL
The minimum travel non hinge shaft connection:
1 mm
Brand:
Ningbo
Model.
The British public to us
Detailed description
The company supplies Ningbo public English American machine pipe jointquality assurance, fake a compensable ten, welcome to consult the discussion.
Contact: Hong Keming Tel: 32208008 high pressure tubing joints are a,D, C, B, F, G, h, K this several; the various joints are divided into direct, 90 degree and 120 degree bend the elbow joint, a plane sealingtype, D is a spherical sealing type, general match C type, C type24.60. and 74 degrees and 24 degrees; followed by G, and 74 g matched;B connector, matched with the 24 degree C type; F type is a disc type joint, with two clips fixed on a plane, most in mechanical engineering; G 3, 24, 60, not 74, seal and C match the same degree;type H is a seal groove machining cone at 24 degrees g, seal and 24degree C type; K type is a quick change joint, it not nuts, sealing,piston Yucca Shaw type easy replacement, commonly used in coal mine. |