YUKEN TECHNOLOGY (GUANGZHOU) CO., LIMITED

Basic parameters

Weight:

1

Support height:

1 m

Allowable load:

1 Pa

Bending strength:

1 mPa

Output liquid pressure:

10 mPa

Use a pressure range:

10 mPa

Medium pressure maximum:

10 mPa

Power:

10

Nominal pressure:

1 PN

Working temperature:

120 ℃

Brand:

AQ

Model.

1 inches

Detailed description

Authentic import, fimbles machine press, strict testing.

The company supplies high-pressure tubing assembly.

Fake a compensable ten, quality assurance.

Welcome to consult the discussion.

Contact: Hong Keming Tel: 32208008 high pressure tubing joints are a,D, C, B, F, G, h, K this several; the various joints are divided into direct, 90 degree and 120 degree bend the elbow joint, a plane sealingtype, D is a spherical sealing type, and C type matched, type C 24.60.and a 74 degree turn 24 degrees; and type G, and 74 g matched; Bconnector, matched with the 24 degree C type; F type is a disc type joint, with two clips fixed on a plane, mostly used in theconstruction machinery; G type 3 kinds, respectively is 24, 60, and 74 degrees, seal and C match the same degree; type H is a seal groovemachining cone at 24 degrees g, seal and 24 degree C type; K type is aquick change connector, it no nut tightening, sealing, piston YuccaShaw type easy replacement, often used in coal mine.